Picture of CNMG 542-M6 TK1501 Seco CNMG 160608-M6 TK1501 80.0° Negative Carbide Medium, Semi Finishing

CNMG 542-M6 TK1501 Seco CNMG 160608-M6 TK1501 80.0° Negative Carbide Medium, Semi Finishing

Part Number: SECO03169653

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SECO
SKU: 1005271
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

SECO negative 80.0 degree medium carbide insert semi finishing with TiCN Al2O3 Cr coating. Grade TK1501. Coating TiCN Al2O3 Cr. Made In Usa: No.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3 + Cr
  • Grade: TK1501

Grades & Coatings

  • Alternate Description: SECO CNMG 160608-M6 TK1501 Negative 80.0° Insert CNMG 160608-M6 TK1501 CNMG 542-M6 TK1501

Other Details

  • Brand: SECO
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Semi finishing with negative 80.0° carbide insert. Used for medium cutting operations. Performs in CNMG 542-M6 TK1501 grade applications.

Composition

CNMG 160608-M6 TK1501 with TiCN, Al2O3, Cr coating.

Typical Uses

CNMG 542-M6 TK1501 negative 80.0° insert for semi finishing. Applied in medium cutting tasks. Used in SECO CNMG 160608-M6 TK1501 tooling.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3 + Cr
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 16 "54"
Grade TK1501
Insert Fits 80.0°
Only registered users can write reviews