Picture of CNMG 433W-MF4 TM4000 Seco CNMG 120412W-MF4 TM4000 80.0° Negative Carbide Medium, Semi Finishing

CNMG 433W-MF4 TM4000 Seco CNMG 120412W-MF4 TM4000 80.0° Negative Carbide Medium, Semi Finishing

Part Number: SECO85480

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SECO
SKU: 1004938
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

SECO TM4000 carbide insert with TiCN Al2O3 Cr coating for medium semi finishing at 80.0 degrees negative angle. Grade: TM4000. Coating: TiCN + Al2O3 + Cr. Negative 80.0° insert.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3 + Cr
  • Grade: TM4000

Grades & Coatings

  • Alternate Description: SECO CNMG 120412W-MF4 TM4000 Negative 80.0° Insert CNMG 120412W-MF4 TM4000 CNMG 433W-MF4 TM4000

Other Details

  • Brand: SECO
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Semi finishing with negative carbide insert. Used for medium cutting operations. Designed for CNMG 433W-MF4 TM4000 grade tools.

Composition

TiCN + Al2O3 + Cr coating. CNMG 120412W-MF4 TM4000 grade. Negative 80.0° insert.

Typical Uses

Semi finishing on metal parts. Applied in TM4000 tool systems. Used in CNMG 433W-MF4 TM4000 applications.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3 + Cr
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade TM4000
Insert Fits 80.0°
Only registered users can write reviews