Picture of CNMG 432-MF2 TP3501 Seco CNMG 120408-MF2 TP3501 80.0° Negative Carbide Medium, Semi Finishing

CNMG 432-MF2 TP3501 Seco CNMG 120408-MF2 TP3501 80.0° Negative Carbide Medium, Semi Finishing

Part Number: SECO49025

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SECO
SKU: 1005098
Vendor: Sussex Tool and Supply
$20.10
This product has a minimum quantity of 10

SECO TP3501 carbide insert with TiCN Al2O3 Cr coating for semi finishing applications. Brand: SECO. Coating: TiCN + Al2O3 + Cr. Grade: TP3501.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3 + Cr
  • Grade: TP3501

Grades & Coatings

  • Alternate Description: SECO CNMG 120408-MF2 TP3501 Negative 80.0° Insert CNMG 120408-MF2 TP3501 CNMG 432-MF2 TP3501

Other Details

  • Brand: SECO
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Negative carbide medium, semi finishing. Used for cutting operations with medium hardness materials. Performs semi finishing on workpieces with moderate feed rates.

Composition

TiCN + Al2O3 + Cr coating. Grade TP3501. CNMG 120408-MF2 insert.

Typical Uses

Semi finishing operations. Cutting medium hardness materials. Applications with 80.0° negative angle insert.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3 + Cr
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade TP3501
Insert Fits 80.0°
Only registered users can write reviews