Picture of CNMG 432-M3 TM2501 Seco CNMG 120408-M3 TM2501 80.0° Negative Carbide Medium, Semi Finishing

CNMG 432-M3 TM2501 Seco CNMG 120408-M3 TM2501 80.0° Negative Carbide Medium, Semi Finishing

Part Number: SECO03275990

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SECO
SKU: 1005703
Vendor: Sussex Tool and Supply
$20.10
This product has a minimum quantity of 10

SECO TM2501 negative 80.0 degree medium carbide insert with TiCN Al2O3 Cr coating for semi finishing. Grade TM2501. Coating TiCN Al2O3 Cr. Made In Usa: No.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3 + Cr
  • Grade: TM2501

Grades & Coatings

  • Alternate Description: SECO CNMG 120408-M3 TM2501 Negative 80.0° Insert CNMG 120408-M3 TM2501 CNMG 432-M3 TM2501

Other Details

  • Brand: SECO
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Semi finishing with negative 80.0° carbide insert. Used for medium cutting operations. Performs in CNMG 120408-M3 TM2501 grade applications.

Composition

TiCN + Al2O3 + Cr coating. CNMG 120408-M3 TM2501 grade. Negative 80.0° carbide medium.

Typical Uses

CNMG 432-M3 TM2501 semi finishing. Negative 80.0° insert in medium cutting. SECO CNMG 120408-M3 TM2501 applications.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3 + Cr
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade TM2501
Insert Fits 80.0°
Only registered users can write reviews