Picture of CNGP43.5FINE-F32 CTP2120 Ceratizit CNGP120402FINE-F32CTP2120 80.0° Negative Carbide 0.0080 0.20mm Radius Medium, Semi Finishing

CNGP43.5FINE-F32 CTP2120 Ceratizit CNGP120402FINE-F32CTP2120 80.0° Negative Carbide 0.0080 0.20mm Radius Medium, Semi Finishing

Part Number: CER11167214

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001417
Vendor: Sussex Tool and Supply
$23.34
This product has a minimum quantity of 10

CERATIZIT turning insert with TiAlN coating, grade CTP2120. 80.0 degree negative carbide, 0.0080 mm radius. Medium semi finishing. Coating and grade as specified in facts.

Key Details

Materials & Finish

  • Coating: TiAlN
  • Grade: CTP2120

Grades & Coatings

  • Alternate Description: CERATIZIT CNGP120402FN-F32CTP2120 80.0° Turning Insert TiAlN CNGP120402FN-F32CTP2120 CNGP43.5FN-F32 CTP2120

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for turning with semi finishing. Has 80.0° negative carbide angle. Provides medium radius of 0.0080 mm and 0.20mm radius.

Composition

CNGP43.5FINE-F32 CTP2120 Ceratizit CNGP120402FINE-F32CTP2120. Grade CTP2120. Coating TiAlN.

Typical Uses

Semi finishing operations. Turning applications. Medium radius cutting tasks.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiAlN
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0080 0.20MM
Insert Style DT
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTP2120
Insert Fits 80.0°
Only registered users can write reviews