Picture of Ceratizit OFHT 040305SN-F50 CTCP220 Milling Insert Octagonal 0.019 Corner Radius TiCN + Al2O3

Ceratizit OFHT 040305SN-F50 CTCP220 Milling Insert Octagonal 0.019 Corner Radius TiCN + Al2O3

Part Number: CER11993130

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1036019
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Insert Application Roughing, Semi Finishing
Cutter Type Insert
Insert Size (IC) 4
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style OF
Grade CTCP220
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Octagonal
Shipping State MICHIGAN
Cutting Edge Material Carbide
Insert Fits Octagonal
Coating TiCN + Al2O3
Corner Radius 0.0196 0.50MM
Chamfer Angle 45.0°
Made In USA No
Only registered users can write reviews