Picture of CCMT432EN-SMCTCP125 Ceratizit CCMT0408EN-SMCTCP125 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

CCMT432EN-SMCTCP125 Ceratizit CCMT0408EN-SMCTCP125 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

Part Number: CER11529760

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001402
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with 80.0 degree angle. TiCN Al2O3 coating on CTCP125 grade. 0.0310 inch radius for semi finishing. Finishing with CTCP125.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP125

Grades & Coatings

  • Alternate Description: CERATIZIT CCMT120408EN-SMCTCP125 80.0° Turning Insert TiCN + Al2O3 CCMT120408EN-SMCTCP125 CCMT432EN-SMCTCP125

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes with 80.0° positive carbide edge. Used for turning operations with TiCN + Al2O3 coating. Provides 0.79mm radius finish on workpieces.

Composition

Ceratizit CCMT432EN-SMCTCP125 with TiCN + Al2O3 coating. Grade CTCP125. 80.0° positive carbide insert.

Typical Uses

Turning operations. Semi finishing and finishing on metal parts. Applied in machining with 0.79mm radius cut.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 12 "43"
Grade CTCP125
Insert Fits 80.0°
Only registered users can write reviews