Picture of CCMT431EN-SMCTC2135 Ceratizit CCMT0404EN-SMCTC2135 80.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

CCMT431EN-SMCTC2135 Ceratizit CCMT0404EN-SMCTC2135 80.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

Part Number: CER11172232

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001387
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Insert Application Semi Finishing, Finishing
Cutter Type Insert
Insert Size (IC) 12 "43"
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style CC
Grade CTC2135
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape 80.0°
Shipping State MICHIGAN
Cutting Edge Material Carbide
Insert Fits 80.0°
Coating TiCN + TiNB
Corner Radius 0.0160 0.41MM
Made In USA No
Only registered users can write reviews