Picture of CCMT431EN-CF55CTEP110 Ceratizit CCMT0404EN-CF55CTEP110 80.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

CCMT431EN-CF55CTEP110 Ceratizit CCMT0404EN-CF55CTEP110 80.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

Part Number: CER11953285

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001384
Vendor: Sussex Tool and Supply
$20.24
This product has a minimum quantity of 10

CERATIZIT turning insert with 80.0 degree angle. TiCN plus Al2O3 coating on CTEP110 grade. Finishing and semi finishing with 0.0160 inch radius. Made in USA: No.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTEP110

Grades & Coatings

  • Alternate Description: CERATIZIT CCMT120404EN-CF55CTEP110 80.0° Turning Insert TiCN + Al2O3 CCMT120404EN-CF55CTEP110 CCMT431EN-CF55CTEP110

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes with 80.0° angle. Uses TiCN + Al2O3 coating for cutting performance. Designed for carbide turning applications.

Composition

CCMT431EN-CF55CTEP110 with TiCN + Al2O3 coating. Grade CTEP110. Positive carbide insert.

Typical Uses

Turning operations. 0.0160 inch (0.41mm) radius finishing. Semi finishing and finishing cuts.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0160 0.41MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 12 "43"
Grade CTEP110
Insert Fits 80.0°
Only registered users can write reviews