Picture of CCMT32.52EN-SMCTCP115 Ceratizit CCMT09T308EN-SMCTCP115 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

CCMT32.52EN-SMCTCP115 Ceratizit CCMT09T308EN-SMCTCP115 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

Part Number: CER11695282

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001374
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT 80 degree turning insert with TiCN and Al2O3 coating for semi and finishing cuts. Coating is TiCN + Al2O3. Grade is CTCP115. Made in Usa: No.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CCMT09T308EN-SMCTCP115 80.0° Turning Insert TiCN + Al2O3 CCMT09T308EN-SMCTCP115 CCMT32.52EN-SMCTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes with 80.0° positive carbide edge. Used for turning operations with TiCN + Al2O3 coating.

Composition

CCMT32.52EN-SMCTCP115, CCMT09T308EN-SMCTCP115, TiCN + Al2O3, CTCP115 grade.

Typical Uses

Turning, finishing, semi-finishing on metal parts with 0.0310 inch radius.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 09 "32"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews