Picture of CCMT32.52EN-SMCTC2135 Ceratizit CCMT09T308EN-SMCTC2135 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

CCMT32.52EN-SMCTC2135 Ceratizit CCMT09T308EN-SMCTC2135 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

Part Number: CER11172231

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001371
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert 80.0 degree positive carbide TiCN TiNB coating CTC2135 grade 0.0310 inch 0.79mm radius semi finishing. Made in Usa: No. Shipping state: MICHIGAN. Coating: TiCN + TiNB.

Key Details

Materials & Finish

  • Coating: TiCN + TiNB
  • Grade: CTC2135

Grades & Coatings

  • Alternate Description: CERATIZIT CCMT09T308EN-SMCTC2135 80.0° Turning Insert TiCN + TiNB CCMT09T308EN-SMCTC2135 CCMT32.52EN-SMCTC2135

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Provides finishing and semi-finishing cuts. Designed for 80.0° turning operations. Uses TiCN + TiNB coating for performance.

Composition

CCMT32.52EN-SMCTC2135, CCMT09T308EN-SMCTC2135. Grade CTC2135. Coating TiCN + TiNB.

Typical Uses

Turning inserts for finishing and semi-finishing. Applied in 0.0310 inch radius cuts. Used in 80.0° turning applications.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + TiNB
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 09 "32"
Grade CTC2135
Insert Fits 80.0°
Only registered users can write reviews