Picture of CCGT432FINE-25Q CTPX710 Ceratizit CCGT120408FINE-25Q CTPX710 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

CCGT432FINE-25Q CTPX710 Ceratizit CCGT120408FINE-25Q CTPX710 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

Part Number: CER12526078

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001311
Vendor: Sussex Tool and Supply
$27.39
This product has a minimum quantity of 10

CERATIZIT turning insert with AlTiN coating, 80.0 degree positive, carbide, 0.0310, 0.79mm radius, semi finishing. Grade CTPX710. Made in Usa: No. Shipping state: MICHIGAN.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Grade: CTPX710

Grades & Coatings

  • Alternate Description: CERATIZIT CCGT120408FN-25Q CTPX710 80.0° Turning Insert AlTiN CCGT120408FN-25Q CTPX710 CCGT432FN-25Q CTPX710

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes metal surfaces with 80.0° angle. Uses AlTiN coating for cutting performance. Operates with 0.0310 inch radius.

Composition

CCGT432FINE-25Q CTPX710, CCGT1204008FINE-25Q CTPX710, AlTiN, CTPX710.

Typical Uses

Turning inserts for finishing and semi-finishing. Applied in metal cutting operations. Used with 0.79mm radius.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating AlTiN
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 12 "43"
Grade CTPX710
Insert Fits 80.0°
Only registered users can write reviews