Picture of CCGT431FINE-25P CTPX710 Ceratizit CCGT120404FINE-25P CTPX710 80.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

CCGT431FINE-25P CTPX710 Ceratizit CCGT120404FINE-25P CTPX710 80.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

Part Number: CER12525501

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001302
Vendor: Sussex Tool and Supply
$25.20
This product has a minimum quantity of 10

CERATIZIT turning insert with AlTiN coating 80.0 degree 0.0160 radius finishing semi finishing. Coating is AlTiN. Grade is CTPX710. Made in Usa: No.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Grade: CTPX710

Grades & Coatings

  • Alternate Description: CERATIZIT CCGT120404FN-25P CTPX710 80.0° Turning Insert AlTiN CCGT120404FN-25P CTPX710 CCGT431FN-25P CTPX710

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes metal surfaces with 80.0° angle. Uses 0.0160 inch radius for precision cutting. Designed for turning operations on hard materials.

Composition

Ceratizit CCGT431FINE-25P CTPX710 with AlTiN coating. Grade CTPX710. 80.0° positive carbide insert.

Typical Uses

Turning inserts in machining. Used for finishing and semi-finishing operations. Applied on metal parts requiring precise radius cuts.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating AlTiN
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0160 0.41MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 12 "43"
Grade CTPX710
Insert Fits 80.0°
Only registered users can write reviews