Picture of CCGT43.5FINE-27 H10T Ceratizit CCGT120402FINE-27 H10T 80.0° Positive Carbide 0.0080 0.20mm Radius Finishing, Semi Finishing

CCGT43.5FINE-27 H10T Ceratizit CCGT120402FINE-27 H10T 80.0° Positive Carbide 0.0080 0.20mm Radius Finishing, Semi Finishing

Part Number: CER60993

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001299
Vendor: Sussex Tool and Supply
$18.90
This product has a minimum quantity of 10

CERATIZIT turning insert uncoated 80.0 degree H10T grade 0.0080 radius finishing semi finishing. CERATIZIT CCGT120402FN-27 H10T 80.0° turning insert uncoated. H10T grade 0.0080 radius finishing semi finishing. Made in Usa: No.

Key Details

Materials & Finish

  • Grade: H10T

Grades & Coatings

  • Alternate Description: CERATIZIT CCGT120402FN-27 H10T 80.0° Turning Insert Uncoated CCGT120402FN-27 H10T CCGT43.5FN-27 H10T

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes with 0.0080 0.20mm radius. Used for turning operations. Performs at 80.0° angle.

Composition

Ceratizit CCGT43.5FINE-27 H10T. Uncoated carbide. Grade H10T.

Typical Uses

Turning insert. Positive carbide finishing. Semi finishing operations.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0080 0.20MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 12 "43"
Grade H10T
Insert Fits 80.0°
Only registered users can write reviews