Picture of CCGT32.52FINE-25Q H210T Ceratizit CCGT09T308FINE-25Q H210T 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

CCGT32.52FINE-25Q H210T Ceratizit CCGT09T308FINE-25Q H210T 80.0° Positive Carbide 0.0310 0.79mm Radius Finishing, Semi Finishing

Part Number: CER11116045

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001294
Vendor: Sussex Tool and Supply
$18.59
This product has a minimum quantity of 10

CERATIZIT turning insert uncoated 80.0 degree positive carbide 0.0310 inch 0.79mm radius semi finishing. Grade H210T. CCGT09T308FN-25Q H210T. Made in Usa: No.

Key Details

Materials & Finish

  • Grade: H210T

Grades & Coatings

  • Alternate Description: CERATIZIT CCGT09T308FN-25Q H210T 80.0° Turning Insert Uncoated CCGT09T308FN-25Q H210T CCGT32.52FN-25Q H210T

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes with 0.0310 inch radius. Used for turning operations at 80.0° angle. Performs cutting on carbide insert.

Composition

Carbide, uncoated, H210T grade. 80.0° positive cutting edge. 0.79mm radius finish.

Typical Uses

Turning inserts for finishing and semi-finishing. Applied in machining operations. Used on CCGT32.52FINE-25Q H210T and CCGT09T308FINE-25Q H210T tools.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 09 "32"
Grade H210T
Insert Fits 80.0°
Only registered users can write reviews