Picture of CCGT32.5.5FINE-25P CTPX710 Ceratizit CCGT09T302FINE-25P CTPX710 80.0° Positive Carbide 0.0080 0.20mm Radius Finishing, Semi Finishing

CCGT32.5.5FINE-25P CTPX710 Ceratizit CCGT09T302FINE-25P CTPX710 80.0° Positive Carbide 0.0080 0.20mm Radius Finishing, Semi Finishing

Part Number: CER12525495

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001273
Vendor: Sussex Tool and Supply
$19.75
This product has a minimum quantity of 10

CERATIZIT turning insert with AlTiN coating 80.0 degree 0.0080 0.20mm radius finishing semi finishing. Grade CTPX710. Made in Usa: No. Shipping state: MICHIGAN.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Grade: CTPX710

Grades & Coatings

  • Alternate Description: CERATIZIT CCGT09T302FN-25P CTPX710 80.0° Turning Insert AlTiN CCGT09T302FN-25P CTPX710 CCGT32.5.5FN-25P CTPX710

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Provides 80.0° positive carbide finishing and semi-finishing. Used for turning operations with 0.0080 to 0.20mm radius. Suitable for CCGT32.5.5FINE-25P and CCGT09T302FINE-25P inserts.

Composition

Ceratizit CCGT32.5.5FINE-25P CTPX710, CCGT09T300FINE-25P CTPX710, AlTiN coating, Grade CTPX710.

Typical Uses

Turning inserts with 80.0° positive angle. Finishing and semi-finishing on workpieces. Applied in machining with 0.0080 to 0.20mm radius.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating AlTiN
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0080 0.20MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 09 "32"
Grade CTPX710
Insert Fits 80.0°
Only registered users can write reviews