Picture of CCGT21.51FINE-25QCTPX710 Ceratizit CCGT060204FINE-25Q CTPX710 80.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

CCGT21.51FINE-25QCTPX710 Ceratizit CCGT060204FINE-25Q CTPX710 80.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

Part Number: CER12526055

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001263
Vendor: Sussex Tool and Supply
$23.25
This product has a minimum quantity of 10

CERATIZIT turning insert with AlTiN coating, 80.0 degree positive, carbide, 0.0160, 0.41mm radius, semi finishing. CCGT060204FN-25Q CTPX710 grade, 80.0° positive, carbide, 0.0160, 0.41mm radius. Made in Usa: No. Shipping state: MICHIGAN.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Grade: CTPX710

Grades & Coatings

  • Alternate Description: CERATIZIT CCGT060204FN-25Q CTPX710 80.0° Turning Insert AlTiN CCGT060204FN-25Q CTPX710 CCGT21.51FN-25QCTPX710

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes metals with 0.0160 radius. Used for turning operations at 80.0° angle. AlTiN coated for cutting performance.

Composition

CCGT21.51FINE-25QCTPX710, CCGT060204FINE-25QCTPX710, AlTiN, CTPX710.

Typical Uses

Turning inserts in metal cutting. Positive carbide cutting tools for finishing and semi-finishing. Used in turning operations with 80.0° angle.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating AlTiN
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0160 0.41MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 06 "21"
Grade CTPX710
Insert Fits 80.0°
Only registered users can write reviews