Picture of CCGT21.50FINE-F23CTP2120 Ceratizit CCGT060201FINE-F23 CTP2120 80.0° Positive Carbide 0.0040 0.10mm Radius Finishing, Semi Finishing

CCGT21.50FINE-F23CTP2120 Ceratizit CCGT060201FINE-F23 CTP2120 80.0° Positive Carbide 0.0040 0.10mm Radius Finishing, Semi Finishing

Part Number: CER11166918

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001242
Vendor: Sussex Tool and Supply
$21.12
This product has a minimum quantity of 10

CERATIZIT turning insert with TiAlN coating, 80.0 degree positive carbide, 0.0040 mm radius, semi finishing. Grade CTP2120, CCGT060201FN-F23. Coating TiAlN, made in USA no. Shipping state MICHIGAN.

Key Details

Materials & Finish

  • Coating: TiAlN
  • Grade: CTP2120

Grades & Coatings

  • Alternate Description: CERATIZIT CCGT060201FN-F23 CTP2120 80.0° Turning Insert TiAlN CCGT060201FN-F23 CTP2120 CCGT21.50FN-F23CTP2120

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Finishes and semi-finishes with 80.0° positive carbide edge. Used for turning operations with 0.0040 and 0.10mm radius. Performs cutting on CCGT060201FINE-F23 CTP2120 inserts.

Composition

Carbide, TiAlN coating, CCGT21.50FINE-F23CTP2120 grade.

Typical Uses

Turning inserts in CCGT060201FN-F23 CTP2120 applications. Finishing and semi-finishing on turning tools. Used in 80.0° positive carbide cutting operations.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiAlN
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0040 0.10MM
Insert Style CC
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Positive
Insert Size (IC) 06 "21"
Grade CTP2120
Insert Fits 80.0°
Only registered users can write reviews