ANSI: 16IR20ABUTHBA
ISO: 16IR20ABUTHBA
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
16mm (3/8" I.C.) LAYDOWN INSERT FOR AMERICAN BUTTRESS INT-RH THREAD; PITCH: 20.00 TPI; GRADE: HBA; MOST APPLICATIONS REQUIRE AN ANVIL CHANGE - SEE PG 71 IN CAT.
Extra-fine sub-micron grade with high toughness, for optimized performance on hardened steels and cast iron up to 62HRc, titanium alloys and super alloys (Hästelloy, Inconel and Nickel based alloys).
