ANSI: 16ERG60P25C
ISO: 16ERG60P25C
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
16mm (3/8" I.C.) LAYDOWN INSERT FOR 60-DEG PART PROF EXT-RH THREAD; PITCH: 08.00 TPI - 14.00 TPI,01.75mm - 03.00mm; GRADE: P25C;
PVD TiN coated grade for treated and hard alloy steels (25 HRc & up) at medium to low cutting speeds.
