ANSI: SPKN42EDTRTIN28
ISO: SPKN42EDTRTIN28
General purpose wear resistant turning grade. The multi-layer coating includes aluminium oxide to add additional heat and wear resistance. It is used to machine steel at lower speeds thanTN15. This turning grade is for demanding metal removal operations, including cutting through scale at low speeds through heavy interruption, and problem machining of stainless steel at low speed and poor rigidity.
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Micrograin carbide enhanced with multilayer PVD coating that offers a lower friction coefficient and a sharper cutting edge. TIN28 is Canela's first choice for Stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. The sharp cutting edge achieved by the PVD coating gives the workpiece an excellent surface finish.
