Picture of BA-750-1250 .530X1.250 Back Spot Facer Internal Tool 66-1190 Solid Tool Back Spot Face 0.1870 4.75mm Wide 0.7500 19.05mm - 3/4 Shank

BA-750-1250 .530X1.250 Back Spot Facer Internal Tool 66-1190 Solid Tool Back Spot Face 0.1870 4.75mm Wide 0.7500 19.05mm - 3/4 Shank

Part Number: INT66-1190

Need Assistance or Service? Please call 262-251-4020

Manufacturer: INTERNAL TOOL
SKU: 1098267
Vendor: Sussex Tool and Supply
$169.99
Products specifications
Attribute name Attribute value
Shipping State CALIFORNIA
Cutter Type Solid Tool
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) BBAR0.7500
Machine Side (Toolpost) Connection Type Boring Bar
Overall Length 4.0000 101.60MM
Shank Or Pilot Diameter 0.7500 19.05MM - 3/4
Mach Side Connection Size 0.7500 19.05MM - 3/4
Type of Tool Boring Bar
Insert Or Tool Tool
Insert Application Finishing, Semi Finishing
Inter Or Extern Internal
Cutting Width 0.1870 4.75MM
Swiss Or Multi Spindle Swiss
Only registered users can write reviews