Sussex Tool and Supply. 25.0°

Filter by attributes

Coating

Select Any Coating ▼

AlTiN

CVD

TI + Al2O3

TiAIN + TiN

TiCN + Al2O3 + TiCN + TiN

TiCN + Al2O3 + TiN

TiN

TiOCN

Corner Radius

Select Any Corner Radius ▼

0.0080 0.20MM

0.0160 0.41MM

0.0310 0.79MM

Cutter Type

Select Any Cutter Type ▼

Insert

Cutting Edge Definition

Select Any Cutting Edge Definition ▼

and enables machining at higher cutting speeds. The downside is very low toughness

and therefore

as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC)

Cemented carbides are a class of hard materials used extensively for cutting tools

Cermet is a cutting material combining ceramics and metals (usualט Nickel). The result is a harder substrate than carbide

it is used only for finishing applications in stable conditions. Some tougher versions are available today for semi roughing. Used very often in Duplex milling.

or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.

therefore more wear-resistant

titanium carbide (TiC)

Cutting Edge Material

Select Any Cutting Edge Material ▼

Carbide

Cermet

Grade

Select Any Grade ▼

CT3000

GT9530

IC8150

IC8250

NS9530

PV3010

T9125

T9135

T9225

T9235

TT5080

TT8105

TT8115

TT8115B

TT9080

UE6020

VP15TF

Hand

Select Any Hand ▼

Neutral

Insert Application

Select Any Insert Application ▼

Finishing

Roughing

Semi Finishing

Insert Fits

Select Any Insert Fits ▼

25.0°

Insert Or Tool

Select Any Insert Or Tool ▼

Insert

Insert Shape Or Cutter Pocket Shape

Select Any Insert Shape Or Cutter Pocket Shape ▼

25.0°

Insert Size (IC)

Select Any Insert Size (IC) ▼

13 "2.5"

16 "33"

Insert Style

Select Any Insert Style ▼

Insert Type

Select Any Insert Type ▼

Negative

Positive

Made In USA

Select Any Made In USA ▼

Shipping State

Select Any Shipping State ▼

ILLINOIS

TEXAS

Filter by manufacturer

Select Manufacturer ▼

MITSUBISHI

TUNGALOY

INGERSOLL

Trouble Finding what you need? We are only One Call Away
262-251-4020

25.0°

XCMT 220.5SVX VP15TF Mitsubishi XCMT 220.5SVX VP15TF 25.0° Positive Carbide 0.0080 0.20mm Radius Finishing, Semi Finishing

XCMT 221SVX VP15TF Mitsubishi XCMT 221SVX VP15TF 25.0° Positive Carbide 0.0160 0.41mm Radius Finishing, Semi Finishing

YNMG2.531FS TT8115 Ingersoll YNMG130404FS TT8115 25.0° Negative Carbide 0.0160 0.41mm Radius Finishing

YNMG2.531FS TT8105 Ingersoll YNMG130404FS TT8105 25.0° Negative Carbide 0.0160 0.41mm Radius Finishing

YNMG2.532FS TT8105 Ingersoll YNMG130408FS TT8105 25.0° Negative Carbide 0.0310 0.79mm Radius Roughing, Semi Finishing

YNMG332 ZM T9125 Tungaloy YNMG160408 ZM T9125 25.0° Negative Carbide 0.0310 0.79mm Radius Roughing, Semi Finishing

YWMT16T308-ZF T9125 Tungaloy YWMT16T308-ZF T9125 25.0° Positive Carbide 0.0310 0.79mm Radius Roughing, Semi Finishing

YNMG332 ZF T9135 Tungaloy YNMG160408 ZF T9135 25.0° Negative Carbide 0.0310 0.79mm Radius Roughing, Semi Finishing

Trouble Finding what you need? We are only One Call Away262-251-4020

25.0°

Trouble Finding what you need? We are only One Call Away
262-251-4020