Picture of 123568100 LT-GRV-Insert A=10 1-N THM- Widia/Kennametal 2017976 Cut Off,Grooving Insert 0.3540 8.99mm Wide 0.0315 0.80mm Radius

123568100 LT-GRV-Insert A=10 1-N THM- Widia/Kennametal 2017976 Cut Off,Grooving Insert 0.3540 8.99mm Wide 0.0315 0.80mm Radius

Part Number: WID2017976

Need Assistance or Service? Please call 262-251-4020

Manufacturer: WIDIA/KENNAMETAL
SKU: 1094693
Vendor: Sussex Tool and Supply
$272.88
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Neutral
Insert Application Roughing, Semi Finishing
Cutter Type Insert
Insert Size (IC) 10
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style LG
Grade THM
Cutting Width 0.3540 8.99MM
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Other
Shipping State PENNSYLVANIA
Cutting Edge Material Carbide
Corner Radius 0.0315 0.80MM
Made In USA No
Insert Type Or Orientation Screw On
Only registered users can write reviews